| 第5章 Simple packaging | ||
|---|---|---|
 |
 |
|
| 第5章 Simple packaging | ||
|---|---|---|
| |
|
|
目次
There is an old Latin saying: 「Longum iter est per praecepta, breve et efficax per exempla」 (「It’s a long way by the rules, but short and efficient with examples」).
Here is an example of creating a simple Debian package from a simple C source using the Makefile as its build system.
Let’s assume this upstream tarball to be debhello-0.0.tar.gz.
This type of source is meant to be installed as a non-system file as:
Basics for the install from the upstream tarball.
$ tar -xzmf debhello-0.0.tar.gz $ cd debhello-0.0 $ make $ make install
Debian packaging requires changing this 「make install」 process to install files to the target system image location instead of the normal location under /usr/local.
![[注記]](images/note.png) | 注記 |
|---|---|
|
Examples of creating a Debian package from other complicated build systems are described in 「13章More Examples」. |
The big picture for building a single non-native Debian package from the upstream tarball debhello-0.0.tar.gz can be summarized as:
The debmake command debianizes the upstream source tree by adding template files only in the debian directory.
The debuild command builds the binary package from the debianized source tree.
Big picture of package building.
$ tar -xzmf debhello-0.0.tar.gz $ cd debhello-0.0 $ debmake ... manual customization $ debuild ...
![[ヒント]](images/tip.png) | ヒント |
|---|---|
|
The debuild command in this and following examples may be substituted by equivalent commands such as the sbuild command. |
| ヒント |
|---|---|
|
If the upstream tarball in the .tar.xz format is available, use it instead of the one in the .tar.gz and .tar.bz2 formats. The xz compression format offers the better compression than the gzip and bzip2 compressions. |
| 注記 |
|---|---|
|
Actual packaging activities are often performed manually without using debmake while referencing only existing similar packages and 「Debian Policy Manual」. |
The debmake command is the helper script for the Debian packaging. (「14章debmake(1) manpage」)
These features make Debian packaging with debmake simple and modern.
In retrospective, I created debmake to simplify this documentation. I consider debmake to be more-or-less a demonstration session generator for tutorial purpose.
The debmake command isn’t the only helper script to make a Debian package. If you are interested alternative packaging helper tools, please see:
Here is a summary of commands similar to the debuild command.
The dpkg-buildpackage command is the official command to build the Debian binary package. For normal binary build, it executes roughly:
「debsign」 (sign the *.dsc and *.changes files)
| 注記 |
|---|---|
|
See dpkg-buildpackage(1) for exact details. |
Let’s get the upstream source.
Download debhello-0.0.tar.gz.
$ wget http://www.example.org/download/debhello-0.0.tar.gz ... $ tar -xzmf debhello-0.0.tar.gz $ tree . ├── debhello-0.0 │ ├── Makefile │ ├── README.md │ └── src │ └── hello.c └── debhello-0.0.tar.gz 3 directories, 4 files
Here, the C source hello.c is a very simple one.
hello.c.
$ cat debhello-0.0/src/hello.c
#include <stdio.h>
int
main()
{
printf("Hello, world!\n");
return 0;
}
Here, the Makefile supports 「GNU Coding Standards」 and 「FHS」. Notably:
Makefile.
$ cat debhello-0.0/Makefile
prefix = /usr/local
all: src/hello
src/hello: src/hello.c
@echo "CFLAGS=$(CFLAGS)" | \
fold -s -w 70 | \
sed -e 's/^/# /'
$(CC) $(CPPFLAGS) $(CFLAGS) $(LDCFLAGS) -o $@ $^
install: src/hello
install -D src/hello \
$(DESTDIR)$(prefix)/bin/hello
clean:
-rm -f src/hello
distclean: clean
uninstall:
-rm -f $(DESTDIR)$(prefix)/bin/hello
.PHONY: all install clean distclean uninstall
| 注記 |
|---|---|
|
The echo of the $(CFLAGS) variable is used to verify the proper setting of the build flag in the following example. |
The output from the debmake command is very verbose and explains what it does as follows.
The output from the debmake command.
$ cd /path/to/debhello-0.0 $ debmake -x1 I: set parameters I: sanity check of parameters I: pkg="debhello", ver="0.0", rev="1" I: *** start packaging in "debhello-0.0". *** I: provide debhello_0.0.orig.tar.gz for non-native Debian package I: pwd = "/path/to" I: $ ln -sf debhello-0.0.tar.gz debhello_0.0.orig.tar.gz I: pwd = "/path/to/debhello-0.0" I: parse binary package settings: I: binary package=debhello Type=bin / Arch=any M-A=foreign I: analyze the source tree I: build_type = make I: scan source for copyright+license text and file extensions I: 50 %, ext = md I: 50 %, ext = c I: check_all_licenses I: ... I: check_all_licenses completed for 3 files. I: bunch_all_licenses I: format_all_licenses I: make debian/* template files I: debmake -x "1" ... I: creating => debian/control I: creating => debian/copyright I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra0_changel... I: creating => debian/changelog I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra0_rules.t... I: creating => debian/rules I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra0source_f... I: creating => debian/source/format I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_README.... I: creating => debian/README.Debian I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_README.... I: creating => debian/README.source I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_clean.t... I: creating => debian/clean I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_gbp.con... I: creating => debian/gbp.conf I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_salsa-c... I: creating => debian/salsa-ci.yml I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1_watch.t... I: creating => debian/watch I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1tests_co... I: creating => debian/tests/control I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1upstream... I: creating => debian/upstream/metadata I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1patches_... I: creating => debian/patches/series I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1source.n... I: creating => debian/source/local-options.ex I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1source.n... I: creating => debian/source/local-patch-header.ex I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1single_d... I: creating => debian/dirs I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1single_i... I: creating => debian/install I: substituting => /usr/lib/python3/dist-packages/debmake/data/extra1single_l... I: creating => debian/links I: $ wrap-and-sort I: $ wrap-and-sort complete. Now, debian/* may have a blank line at the top....
The debmake command generates all these template files based on command line options. Since no options are specified, the debmake command chooses reasonable default values for you:
| 注記 |
|---|---|
|
Here, the debmake command is invoked with the -x1 option to keep this tutorial simple. Use of default -x3 option is highly recommended. |
Let’s inspect generated template files.
The source tree after the basic debmake execution.
$ cd /path/to $ tree . ├── debhello-0.0 │ ├── Makefile │ ├── README.md │ ├── debian │ │ ├── README.Debian │ │ ├── README.source │ │ ├── changelog │ │ ├── clean │ │ ├── control │ │ ├── copyright │ │ ├── dirs │ │ ├── gbp.conf │ │ ├── install │ │ ├── links │ │ ├── patches │ │ │ └── series │ │ ├── rules │ │ ├── salsa-ci.yml │ │ ├── source │ │ │ ├── format │ │ │ ├── local-options.ex │ │ │ └── local-patch-header.ex │ │ ├── tests │ │ │ └── control │ │ ├── upstream │ │ │ └── metadata │ │ └── watch │ └── src │ └── hello.c ├── debhello-0.0.tar.gz └── debhello_0.0.orig.tar.gz -> debhello-0.0.tar.gz 8 directories, 24 files
The debian/rules file is the build script provided by the package maintainer. Here is its template file generated by the debmake command.
debian/rules (template file):
$ cd /path/to/debhello-0.0
$ cat debian/rules
#!/usr/bin/make -f
# You must remove unused comment lines for the released package.
#export DH_VERBOSE = 1
#export DEB_BUILD_MAINT_OPTIONS = hardening=+all
#export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic
#export DEB_LDFLAGS_MAINT_APPEND = -Wl,-O1
%:
dh $@
#override_dh_auto_install:
# dh_auto_install -- prefix=/usr
#override_dh_install:
# dh_install --list-missing -X.pyc -X.pyo
This is essentially the standard debian/rules file with the dh command. (There are some commented out contents for you to customize it.)
The debian/control file provides the main meta data for the Debian package. Here is its template file generated by the debmake command.
debian/control (template file):
$ cat debian/control Source: debhello Section: unknown Priority: optional Maintainer: "Osamu Aoki" <[email protected]> Build-Depends: debhelper-compat (= 13) Standards-Version: 4.6.2 Homepage: <insert the upstream URL, if relevant> Rules-Requires-Root: no #Vcs-Git: https://salsa.debian.org/debian/debhello.git #Vcs-Browser: https://salsa.debian.org/debian/debhello Package: debhello Architecture: any Multi-Arch: foreign Depends: ${misc:Depends}, ${shlibs:Depends} Description: auto-generated package by debmake This Debian binary package was auto-generated by the debmake(1) command provided by the debmake package.
![[警告]](images/warning.png) | 警告 |
|---|---|
|
If you leave 「Section: unknown」 in the template debian/control file unchanged, the lintian error may cause the build to fail. |
Since this is the ELF binary executable package, the debmake command sets 「Architecture: any」 and 「Multi-Arch: foreign」. Also, it sets required substvar parameters as 「Depends: ${shlibs:Depends}, ${misc:Depends}」. These are explained in 「6章Basics for packaging」.
| 注記 |
|---|---|
|
Please note this debian/control file uses the RFC-822 style as documented in 「5.2 Source package control files — debian/control」 of the 「Debian Policy Manual」. The use of the empty line and the leading space are significant. |
The debian/copyright file provides the copyright summary data of the Debian package. Here is its template file generated by the debmake command.
debian/copyright (template file):
$ cat debian/copyright
Format: https://iwawocd.cewmufwd.tk/doc/packaging-manuals/copyright-format/1.0/
Upstream-Name: debhello
Upstream-Contact: <preferred name and address to reach the upstream project>
Source: <url://example.com>
#
# Please double check copyright with the licensecheck(1) command.
Files: Makefile
README.md
src/hello.c
Copyright: __NO_COPYRIGHT_NOR_LICENSE__
License: __NO_COPYRIGHT_NOR_LICENSE__
#----------------------------------------------------------------------------...
# Files marked as NO_LICENSE_TEXT_FOUND may be covered by the following
# license/copyright files.
Some manual modification is required to make the proper Debian package as a maintainer.
In order to install files as a part of the system files, the $(prefix) value of /usr/local in the Makefile should be overridden to be /usr. This can be accommodated by the following the debian/rules file with the override_dh_auto_install target setting 「prefix=/usr」.
debian/rules (maintainer version):
$ cd /path/to/debhello-0.0
$ vim debian/rules
... hack, hack, hack, ...
$ cat debian/rules
#!/usr/bin/make -f
export DH_VERBOSE = 1
export DEB_BUILD_MAINT_OPTIONS = hardening=+all
export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic
export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed
%:
dh $@
override_dh_auto_install:
dh_auto_install -- prefix=/usr
Exporting the DH_VERBOSE environment variable in the debian/rules file as above forces the debhelper tool to make a fine grained build report.
Exporting DEB_BUILD_MAINT_OPTION as above sets the hardening options as described in the 「FEATURE AREAS/ENVIRONMENT」 in dpkg-buildflags(1). [9]
Exporting DEB_CFLAGS_MAINT_APPEND as above forces the C compiler to emit all the warnings.
Exporting DEB_LDFLAGS_MAINT_APPEND as above forces the linker to link only when the library is actually needed. [10]
The dh_auto_install command for the Makefile based build system essentially runs 「$(MAKE) install DESTDIR=debian/debhello」. The creation of this override_dh_auto_install target changes its behavior to 「$(MAKE) install DESTDIR=debian/debhello prefix=/usr」.
Here are the maintainer versions of the debian/control and debian/copyright files.
debian/control (maintainer version):
$ vim debian/control ... hack, hack, hack, ... $ cat debian/control Source: debhello Section: devel Priority: optional Maintainer: Osamu Aoki <[email protected]> Build-Depends: debhelper-compat (= 13) Standards-Version: 4.6.2 Homepage: https://salsa.debian.org/debian/debmake-doc Rules-Requires-Root: no Package: debhello Architecture: any Multi-Arch: foreign Depends: ${misc:Depends}, ${shlibs:Depends} Description: Simple packaging example for debmake This Debian binary package is an example package. (This is an example only)
debian/copyright (maintainer version):
$ vim debian/copyright ... hack, hack, hack, ... $ cat debian/copyright Format: https://iwawocd.cewmufwd.tk/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: debhello Upstream-Contact: Osamu Aoki <[email protected]> Source: https://salsa.debian.org/debian/debmake-doc Files: * Copyright: 2015-2021 Osamu Aoki <[email protected]> License: Expat Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: . The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. . THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Let’s remove unused template files and edit remaining template files:
Template files under debian/. (v=0.0):
$ rm -f debian/clean debian/dirs debian/install debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree -F debian debian/ ├── README.Debian ├── changelog ├── control ├── copyright ├── gbp.conf ├── rules* ├── salsa-ci.yml ├── source/ │ └── format ├── tests/ │ └── control ├── upstream/ │ └── metadata └── watch 4 directories, 11 files
| ヒント |
|---|---|
|
Configuration files used by the dh_* commands from the debhelper package usually treat # as the start of a comment line. |
You can create a non-native Debian package using the debuild command or its equivalents (see 「「What is debuild?」」) in this source tree. The command output is very verbose and explains what it does as follows.
Building package with debuild.
$ cd /path/to/debhello-0.0 $ debuild dpkg-buildpackage -us -uc -ui -i dpkg-buildpackage: info: source package debhello dpkg-buildpackage: info: source version 0.0-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Osamu Aoki <[email protected]> dpkg-source -i --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_auto_clean make -j12 distclean ... debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j12 "INSTALL=install --strip-program=true" make[1]: Entering directory '/path/to/debhello-0.0' # CFLAGS=-g -O2 ... Finished running lintian.
You can verify that CFLAGS is updated properly with -Wall and -pedantic by the DEB_CFLAGS_MAINT_APPEND variable.
The manpage should be added to the package as reported by the lintian package, as shown in later examples (see 「13章More Examples」). Let’s move on for now.
Let’s inspect the result.
The generated files of debhello version 0.0 by the debuild command:
$ cd /path/to $ tree -FL 1 ./ ├── debhello-0.0/ ├── debhello-0.0.tar.gz ├── debhello-dbgsym_0.0-1_amd64.deb ├── debhello_0.0-1.debian.tar.xz ├── debhello_0.0-1.dsc ├── debhello_0.0-1_amd64.build ├── debhello_0.0-1_amd64.buildinfo ├── debhello_0.0-1_amd64.changes ├── debhello_0.0-1_amd64.deb └── debhello_0.0.orig.tar.gz -> debhello-0.0.tar.gz 2 directories, 9 files
You see all the generated files.
The debhello_0.0-1.debian.tar.xz contains the Debian changes to the upstream source as follows.
The compressed archive contents of debhello_0.0-1.debian.tar.xz:
$ tar -tzf debhello-0.0.tar.gz debhello-0.0/ debhello-0.0/src/ debhello-0.0/src/hello.c debhello-0.0/Makefile debhello-0.0/README.md $ tar --xz -tf debhello_0.0-1.debian.tar.xz debian/ debian/README.Debian debian/changelog debian/control debian/copyright debian/gbp.conf debian/rules debian/salsa-ci.yml debian/source/ debian/source/format debian/tests/ debian/tests/control debian/upstream/ debian/upstream/metadata debian/watch
The debhello_0.0-1_amd64.deb contains the binary files to be installed to the target system.
The debhello-debsym_0.0-1_amd64.deb contains the debug symbol files to be installed to the target system.
The binary package contents of all binary packages:
$ dpkg -c debhello-dbgsym_0.0-1_amd64.deb drwxr-xr-x root/root ... ./ drwxr-xr-x root/root ... ./usr/ drwxr-xr-x root/root ... ./usr/lib/ drwxr-xr-x root/root ... ./usr/lib/debug/ drwxr-xr-x root/root ... ./usr/lib/debug/.build-id/ drwxr-xr-x root/root ... ./usr/lib/debug/.build-id/be/ -rw-r--r-- root/root ... ./usr/lib/debug/.build-id/be/f1e0185834f3c3e2614cf8... drwxr-xr-x root/root ... ./usr/share/ drwxr-xr-x root/root ... ./usr/share/doc/ lrwxrwxrwx root/root ... ./usr/share/doc/debhello-dbgsym -> debhello $ dpkg -c debhello_0.0-1_amd64.deb drwxr-xr-x root/root ... ./ drwxr-xr-x root/root ... ./usr/ drwxr-xr-x root/root ... ./usr/bin/ -rwxr-xr-x root/root ... ./usr/bin/hello drwxr-xr-x root/root ... ./usr/share/ drwxr-xr-x root/root ... ./usr/share/doc/ drwxr-xr-x root/root ... ./usr/share/doc/debhello/ -rw-r--r-- root/root ... ./usr/share/doc/debhello/README.Debian -rw-r--r-- root/root ... ./usr/share/doc/debhello/changelog.Debian.gz -rw-r--r-- root/root ... ./usr/share/doc/debhello/copyright
The generated dependency list of all binary packages.
The generated dependency list of all binary packages (v=0.0):
$ dpkg -f debhello-dbgsym_0.0-1_amd64.deb pre-depends \
depends recommends conflicts breaks
Depends: debhello (= 0.0-1)
$ dpkg -f debhello_0.0-1_amd64.deb pre-depends \
depends recommends conflicts breaks
Depends: libc6 (>= 2.34)
![[注意]](images/caution.png) | 注意 |
|---|---|
|
Many more details need to be addressed before uploading the package to the Debian archive. |
| 注記 |
|---|---|
|
If manual adjustments of auto-generated configuration files by the debmake command are skipped, the generated binary package may lack meaningful package description and some of the policy requirements may be missed. This sloppy package functions well under the dpkg command, and may be good enough for your local deployment. |
The above example did not touch the upstream source to make the proper Debian package. An alternative approach as the maintainer is to modify files in the upstream source. For example, Makefile may be modified to set the $(prefix) value to /usr.
| 注記 |
|---|---|
|
The above 「「Step 3: Modification to the template files」」 using the debian/rules file is the better approach for packaging for this example. But let’s continue on with this alternative approaches as a leaning experience. |
In the following, let’s consider 3 simple variants of this alternative approach to generate debian/patches/* files representing modifications to the upstream source in the Debian source format 「3.0 (quilt)」. These substitute 「「Step 3: Modification to the template files」」 in the above step-by-step example:
Please note the debian/rules file used for these examples doesn’t have the override_dh_auto_install target as follows:
debian/rules (alternative maintainer version):
$ cd /path/to/debhello-0.0
$ vim debian/rules
... hack, hack, hack, ...
$ cat debian/rules
#!/usr/bin/make -f
export DH_VERBOSE = 1
export DEB_BUILD_MAINT_OPTIONS = hardening=+all
export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic
export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed
%:
dh $@
Here, the patch file 000-prefix-usr.patch is created using the diff command.
Patch by 「diff -u」.
$ cp -a debhello-0.0 debhello-0.0.orig $ vim debhello-0.0/Makefile ... hack, hack, hack, ... $ diff -Nru debhello-0.0.orig debhello-0.0 >000-prefix-usr.patch $ cat 000-prefix-usr.patch diff -Nru debhello-0.0.orig/Makefile debhello-0.0/Makefile --- debhello-0.0.orig/Makefile 2024-07-24 10:12:40.382927188 +0900 +++ debhello-0.0/Makefile 2024-07-24 10:12:40.478928659 +0900 @@ -1,4 +1,4 @@ -prefix = /usr/local +prefix = /usr all: src/hello $ rm -rf debhello-0.0 $ mv -f debhello-0.0.orig debhello-0.0
Please note that the upstream source tree is restored to the original state after generating a patch file 000-prefix-usr.patch.
This 000-prefix-usr.patch is edited to be DEP-3 conforming and moved to the right location as below.
000-prefix-usr.patch (DEP-3):
$ echo '000-prefix-usr.patch' >debian/patches/series $ vim ../000-prefix-usr.patch ... hack, hack, hack, ... $ mv -f ../000-prefix-usr.patch debian/patches/000-prefix-usr.patch $ cat debian/patches/000-prefix-usr.patch From: Osamu Aoki <[email protected]> Description: set prefix=/usr patch diff -Nru debhello-0.0.orig/Makefile debhello-0.0/Makefile --- debhello-0.0.orig/Makefile +++ debhello-0.0/Makefile @@ -1,4 +1,4 @@ -prefix = /usr/local +prefix = /usr all: src/hello
| 注記 |
|---|---|
|
When generating the Debian source package by dpkg-source via dpkg-buildpackage in the following step of 「「Step 4: Building package with debuild」」, the dpkg-source command assumes that no patch was applied to the upstream source, since the .pc/applied-patches is missing. |
Here, the patch file 000-prefix-usr.patch is created using the dquilt command.
dquilt is a simple wrapper of the quilt program. The syntax and function of the dquilt command is the same as the quilt(1) command, except for the fact that the generated patch is stored in the debian/patches/ directory.
Patch by dquilt.
$ dquilt new 000-prefix-usr.patch
Patch debian/patches/000-prefix-usr.patch is now on top
$ dquilt add Makefile
File Makefile added to patch debian/patches/000-prefix-usr.patch
... hack, hack, hack, ...
$ head -1 Makefile
prefix = /usr
$ dquilt refresh
Refreshed patch debian/patches/000-prefix-usr.patch
$ dquilt header -e --dep3
... edit the DEP-3 patch header with editor
$ tree -a
.
├── debian
│ ├── changelog
│ ├── clean
│ ├── control
│ ├── copyright
│ ├── dirs
│ ├── gbp.conf
│ ├── install
│ ├── links
│ ├── patches
│ │ ├── 000-prefix-usr.patch
│ │ └── series
│ ├── README.Debian
│ ├── README.source
│ ├── rules
│ ├── salsa-ci.yml
│ ├── source
│ │ ├── format
│ │ ├── local-options.ex
│ │ └── local-patch-header.ex
│ ├── tests
│ │ └── control
│ ├── upstream
│ │ └── metadata
│ └── watch
├── Makefile
├── .pc
│ ├── 000-prefix-usr.patch
│ │ ├── Makefile
│ │ └── .timestamp
│ ├── applied-patches
│ ├── .quilt_patches
│ ├── .quilt_series
│ └── .version
├── README.md
└── src
└── hello.c
9 directories, 29 files
$ cat debian/patches/series
000-prefix-usr.patch
$ cat debian/patches/000-prefix-usr.patch
Description: set prefix=/usr patch
Author: Osamu Aoki <[email protected]>
Index: debhello-0.0/Makefile
===================================================================
--- debhello-0.0.orig/Makefile
+++ debhello-0.0/Makefile
@@ -1,4 +1,4 @@
-prefix = /usr/local
+prefix = /usr
all: src/hello
Here, Makefile in the upstream source tree doesn’t need to be restored to the original state for the packaging.
| 注記 |
|---|---|
|
When generating the Debian source package by dpkg-source via dpkg-buildpackage in the following step of 「「Step 4: Building package with debuild」」, the dpkg-source command assumes that patches were applied to the upstream source, since the .pc/applied-patches exists. |
The upstream source tree can be restored to the original state for the packaging.
The upstream source tree (restored):
$ dquilt pop -a Removing patch debian/patches/000-prefix-usr.patch Restoring Makefile No patches applied $ head -1 Makefile prefix = /usr/local $ tree -a .pc .pc ├── .quilt_patches ├── .quilt_series └── .version 1 directory, 3 files
Here, Makefile is restored and the .pc/applied-patches is missing.
Here, the patch file isn’t created in this step but the source files are setup to create debian/patches/* files in the following step of 「「Step 4: Building package with debuild」」.
Let’s edit the upstream source.
Modified Makefile.
$ vim Makefile ... hack, hack, hack, ... $ head -n1 Makefile prefix = /usr
Let’s edit debian/source/local-options:
debian/source/local-options for auto-commit.
$ mv debian/source/local-options.ex debian/source/local-options $ vim debian/source/local-options ... hack, hack, hack, ... $ cat debian/source/local-options # == Patch applied strategy (merge) == # # The source outside of debian/ directory is modified by maintainer and # different from the upstream one: # * Workflow using dpkg-source commit (commit all to VCS after dpkg-source ... # https://iwawocd.cewmufwd.tk/doc/manuals/debmake-doc/ch04.en.html#dpkg-sour... # * Workflow described in dgit-maint-merge(7) # single-debian-patch auto-commit
Let’s edit debian/source/local-patch-header:
debian/source/local-patch-header for auto-commit.
$ mv debian/source/local-patch-header.ex debian/source/local-patch-header $ vim debian/source/local-patch-header ... hack, hack, hack, ... $ cat debian/source/local-patch-header Description: debian-changes Author: Osamu Aoki <[email protected]>
Let’s remove debian/patches/* files and other unused template files.
Remove unused template files.
$ rm -f debian/clean debian/dirs debian/install debian/links $ rm -f debian/README.source debian/source/*.ex $ rm -rf debian/patches $ tree debian debian ├── README.Debian ├── changelog ├── control ├── copyright ├── gbp.conf ├── rules ├── salsa-ci.yml ├── source │ ├── format │ ├── local-options │ └── local-patch-header ├── tests │ └── control ├── upstream │ └── metadata └── watch 4 directories, 13 files
There are no debian/patches/* files at the end of this step.
| 注記 |
|---|---|
|
When generating the Debian source package by dpkg-source via dpkg-buildpackage in the following step of 「「Step 4: Building package with debuild」」, the dpkg-source command uses options specified in debian/source/local-options to auto-commit modification applied to the upstream source as patches/debian-changes. |
Let’s inspect the Debian source package generated after the following 「「Step 4: Building package with debuild」」 step and extracting files from debhello-0.0.debian.tar.xz.
Inspect debhello-0.0.debian.tar.xz after debuild.
$ tar --xz -xvf debhello_0.0-1.debian.tar.xz debian/ debian/README.Debian debian/changelog debian/control debian/copyright debian/gbp.conf debian/patches/ debian/patches/debian-changes debian/patches/series debian/rules debian/salsa-ci.yml debian/source/ debian/source/format debian/tests/ debian/tests/control debian/upstream/ debian/upstream/metadata debian/watch
Let’s check generated debian/patches/* files.
Inspect debian/patches/* after debuild.
$ cat debian/patches/series debian-changes $ cat debian/patches/debian-changes Description: debian-changes Author: Osamu Aoki <[email protected]> --- debhello-0.0.orig/Makefile +++ debhello-0.0/Makefile @@ -1,4 +1,4 @@ -prefix = /usr/local +prefix = /usr all: src/hello
The Debian source package debhello-0.0.debian.tar.xz is confirmed to be generated properly with debian/patches/* files for the Debian modification.
[9] This is a cliché to force a read-only relocation link for the hardening and to prevent the lintian warning 「W: debhello: hardening-no-relro usr/bin/hello」. This is not really needed for this example but should be harmless. The lintian tool seems to produce a false positive warning for this case which has no linked library.
[10] This is a cliché to prevent overlinking for the complex library dependency case such as Gnome programs. This is not really needed for this simple example but should be harmless.
| |
|
|
| 第4章 Tool Setups |
|
第6章 Basics for packaging |