dpkg and apt into believing that some package is installed even though it is only an empty shell. This allows satisfying dependencies on a package when the corresponding software was installed outside the scope of the packaging system. Such a method works, but it should still be avoided whenever possible, since there is no guarantee that the manually installed software behaves exactly like the corresponding package would and other packages depending on it would not work properly.
equivs-control وequivs-build (من الحزمة equivs)، ينشئ الأمر equivs-control ملف ترويسة حزمة دبيان يجب تعديله حتى يحوي اسم الحزمة المنشأة، ورقم إصدارها، واسم مشرفها، واعتمادياتها، ووصفها. الحقول الأخرى التي لا تملك قيماً افتراضية ليست إلزامية ويمكن حذفها. الحقول Copyright وChangelog وReadme وExtra-Files ليست حقولاً معيارية في في حزم دبيان؛ لا معنى لهذه الحقول خارج نطاق equivs-build، وسوف تُحذَف من ترويسات الحزم المولّدة.
مثال 15.2. ملف ترويسة الحزمة الزائفة libxml-libxml-perl
Section: perl Priority: optional Standards-Version: 4.5.1 Package: libxml-libxml-perl Version: 2.0207-1 Maintainer: Raphael Hertzog <[email protected]> Depends: libxml2 (>= 2.9.10) Architecture: all Description: Fake package - module manually installed in site_perl This is a fake package to let the packaging system believe that this Debian package is installed. . In fact, the package is not installed since a newer version of the module has been manually compiled & installed in the site_perl directory.
equivs-build file. تهانينا: أُنشِئَت الحزمة في المجلد الحالي ويمكن التعامل معها مثل أي حزمة دبيان أخرى.
$equivs-build fileequivs-build control dpkg-buildpackage: info: source package libxml-libxml-perl dpkg-buildpackage: info: source version 2.0207-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Raphael Hertzog <[email protected]> dpkg-buildpackage: info: host architecture amd64 dpkg-source --before-build . debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf create-stamp debian/debhelper-build-stamp dh_prep dh_install dh_installdocs dh_installchangelogs dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libxml-libxml-perl' in '../libxml-libxml-perl_2.0207-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libxml-libxml-perl_2.0207-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) The package has been created. Attention, the package has been created in the current directory, not in ".." as indicated by the messaige above!
falcot-data-1.0 لتخزين الحزمة المصدرية. سوف تُسمّى الحزمة ‒منطقياً‒ falcot-data وستحمل رقم الإصدار 1.0. بعدها يضع مدير النظام المستندات في المجلد الفرعي data. ثم يستدعي الأمر dh_make (من الحزمة dh-make) لإضافة الملفات اللازمة لعملية توليد الحزمة، التي ستحفظ جميعاً في المجلد الفرعي debian:
$cd falcot-data-1.0$dh_make --nativeType of package: (single, indep, library, python) [s/i/l/p]?iMaintainer Name : Raphael Hertzog Email-Address : [email protected] Date : Sat, 26 Feb 2021 13:02:06 +0100 Package Name : falcot-data Version : 1.0 License : gpl3 Package Type : indep Are the details correct? [Y/n/q] Currently there is not top level Makefile. This may require additional tuning Done. Please edit the files in the debian/ subdirectory now. $
Architecture: all in debian/control). single acts as a counterpart, and leads to a single binary package that is dependent on the target architecture (Architecture: any). In this case, the former choice is more relevant since the package only contains documents and no binary programs, so it can be used similarly on computers of all architectures.
dh_make command created a debian subdirectory with many files. Some are required, in particular rules, control, changelog and copyright. Files with the .ex extension are example files that can be used by modifying them (and removing the extension) when appropriate. When they are not needed, removing them is recommended. The compat file is not used nor created anymore. Instead of defining the debhelper compatibility level as a number in this file, it is now defined as a build-dependency on the debhelper-compat virtual package in the Build-Depends file in debian/control.
copyright file must contain information about the authors of the documents included in the package, and the related copyright and license. In our case, these are internal documents and their use is restricted to within the Falcot Corp company. The default format used for this file is defined in the Format field.
changelog file is generally appropriate; replacing the “Initial release” with a more verbose explanation and changing the distribution from UNRELEASED or unstable to the target release name is enough.
control file must also be updated: the Section field can be changed to misc and the Homepage, Vcs-Git and Vcs-Browser fields were removed. The Depends fields was completed with firefox-esr | www-browser so as to ensure the availability of a web browser able to display the documents in the package. If the package does not require to run any commands as root (see أدوات fakeroot), the Rules-Requires-Root field can be left as is.
مثال 15.3. ملف control
Source: falcot-data Section: misc Priority: optional Maintainer: Raphael Hertzog <[email protected]> Build-Depends: debhelper-compat (= 13) Standards-Version: 4.5.1 Rules-Requires-Root: no Package: falcot-data Architecture: all Depends: firefox-esr | www-browser, ${misc:Depends} Description: Internal Falcot Corp Documentation This package provides several documents describing the internal structure at Falcot Corp. This includes: - organization diagram - contacts for each department. . These documents MUST NOT leave the company. Their use is INTERNAL ONLY.
مثال 15.4. ملف changelog
falcot-data (1.0) bullseye; urgency=low
* Initial Release.
* Let's start with few documents:
- internal company structure;
- contacts for each department.
-- Raphael Hertzog <[email protected]> Sat, 26 Feb 2022 15:12:06 +0100
مثال 15.5. ملف copyright
Format: https://iwawocd.cewmufwd.tk/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: falcot-data Files: * Copyright: 2004-2021 Falcot Corp License: All rights reserved.
rules عادة مجموعة قواعد تستخدم لضبط وبناء وتثبيت البرنامج في مجلد فرعي مخصص (يسمى حسب اسم الحزمة الثنائية). بعدها تؤرشف محتويات هذا المجلد الفرعي في حزمة دبيان كما لو كانت جذر نظام الملفات. في حالتنا، سوف تثبت الملفات في المجلد الفرعي debian/falcot-data/usr/share/falcot-data/، حتى يؤدي تثبيت الحزمة المولّدة لنشر الملفات في /usr/share/falcot-data/. يستخدم الملف rules كملف Makefile فيه بضعة أهداف قياسية (منها clean الذي يستخدم لتنظيف المجلد المصدر، وbinary الذي يستخدم لتوليد الحزمة الثنائية).
debhelper. وهذه هي حالة الملفات التي يولدها dh_make. لتثبيت ملفاتنا، علينا فقط ضبط سلوك الأمر dh_install عبر إنشاء ملف debian/falcot-data.install التالي:
data/* usr/share/falcot-data/
falcot-data.desktop file and get it installed in /usr/share/applications by adding a second line to debian/falcot-data.install.
مثال 15.6. ملف falcot-data.desktop
[Desktop Entry] Name=Internal Falcot Corp Documentation Comment=Starts a browser to read the documentation Exec=x-www-browser /usr/share/falcot-data/index.html Terminal=false Type=Application Categories=Documentation;
debian/falcot-data.install كما يبدو بعد تحديثه:
data/* usr/share/falcot-data/ falcot-data.desktop usr/share/applications/
dpkg-buildpackage -us -uc command from within the falcot-data-1.0 directory.